Phaser 7750
  > Support
  > Knowledge Base
  > FAQ
  > Drivers

Support Topics
Step by step guides
  >  Errors, Jams, Failures and Other Messages
  >  Print Quality Problems
  >  General Information
  >  Installing and Setting Up the Printer, Networking
  >  Other Printing Problems
How To
  >  Install Printer Drivers
  >  Printer Setup
  >  Load Paper Trays
  >  Replace Consumables (Toner, Imaging Unit, etc.)
  >  Read the Meters



Remove Print Smears / Printing Fuser Cleaning Pages

With Troublshooting highlighted on the printer display perform the following steps:

  1. Press OK.

  2. Press the Down Arrow and scroll to Print Quality Problems.

  3. Press OK.

  4. Press the Down Arrow and scroll to Remove Print Smears.

  5. Press OK. The printer will print 5 cleaning pages.

Repeat this process five or six times, to remove stubborn toner buildup from the fuser.

Always make sure you are matching the type of paper loaded in the printer tray(s) to the correct Paper Type front panel setting. When you load a tray with paper, the front panel will ask you to indicate the type of paper you loaded. For correct print quality and printer operation, be sure to set this correctly.



Document ID: R1010121055

Direct URL to this document (to bookmark this page)
http://www.xerox.com/office/phaser-7750kb/,solution=R1010121055